Table of Contents
Advertisement
After Installation or Service
• After installation, test the light system to ensure that it is operating properly.
• Test all vehicle functions, including horn operation, vehicle safety functions, and
vehicle light systems, to ensure proper operation. Ensure that the installation has not
affected the vehicle operation or changed any vehicle safety function or circuit.
• Scratched or dull reflectors, mirrors, or lenses will reduce the effectiveness of the
lighting system. Avoid heavy pressure and use of caustic or petroleum based products
when cleaning the lighting system. Replace any optical components that may have
been scratched or crazed during system installation.
• Do not attempt to activate or deactivate the light system control while driving in a
hazardous situation.
• Frequently inspect the light system to ensure that it is operating properly and that it is
securely attached to the vehicle.
• After installation and testing are complete, provide a copy of these instructions to
instructional staff and all operating personnel.
• File these instructions in a safe place and refer to them when maintaining and/or
reinstalling the product.
Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death.
RETAIN AND REFER TO THIS MESSAGE
Safety Message to Operators of Warning Light Equipment
People's lives depend on your safe use of our products. Listed below are some important
safety instructions and precautions you should follow:
• Do not attempt to activate or deactivate the light system control while driving in a
hazardous situation.
• Although your warning system is operating properly, it may not be completely
effective. People may not see or heed your warning signal. You must recognize this
fact and continue to drive cautiously.
• Situations may occur that obstruct your warning signal when natural and man-made
objects are between your vehicle and others, such as raising your hood or trunk lid. If
these situations occur, be especially careful.
• The effectiveness of an interior mounted warning light depends on the clarity, the
tinting, and the angle of the glass it is being placed behind. Tinting, dirt defects, and
steeply angled glass reduce the light output of the warning light. This may reduce the
effectiveness of the light as a warning signal. If your vehicle has dirty, tinted, or steeply
angled glass, use extra caution when driving your vehicle or blocking the right of way
with your vehicle.
Installation, Maintenance, and Service Manual
Federal Signal www.fedsig.com
Safety Message to Operators of Warning Light Equipment
7
Hide quick links:
Advertisement
Table of Contents
