System Leds; System Status Leds - Alcatel OmniStack LS 6248 Getting Started Manual

LED Condition
Green
Green Blinking
Amber
Amber Flashing
LED Condition
Power On Green
Amber
Off
Diag Flashing Green
On Green
On Amber
BPS On Green
On Amber
Off
Stack On Green
Flashing Green
On Amber
Flashing Amber
Port Status LEDs
Status
Stack in normal operating state (Master Unit)
Master Unit is initiating stack (Master Unit)
Stack in normal operating state (Stack Member Unit)
Master Unit is initiating stack (Stack Member Unit)
Figure 1-4. System LEDs
Table 1-2. System Status LEDs

System Status LEDs

Status
Switch is receiving power.
Internal power supply fault.
Power off or failure.
System self-diagnostic test in progress.
System self-diagnostic test successfully completed.
System self-diagnostic test has failed.
The Backup Power Supply is connected and operating
normally.
The Backup Power Supply is connected but faulty.
The Backup Power Supply is off or disconnected.
Stack normal operating state (Master unit).
System initialization (Master unit).
Stack normal operating state (Slave unit).
System initialization (Slave unit), or system in arbitrating/
election state.
Description of Hardware
1
1-9