Safety Instructions - IKRA Mogatec GM LI-2025 Operating Instructions Manual

This condition reduces the ability of the hand to sense
and regulate temperature, causes numbness and a
sensation of heat, and can cause damage to the nervous
and circulatory systems and to necrosis.
Not all factors that lead to Raynaud's syndrome are
known, but cold water, smoking, and illnesses that
impact the blood vessels and the circulatory system
and severe or long-lasting exposure to vibrations are
known to be factors that contribute to the development of
Raynaud's syndrome. Observe the following instructions
to reduce the risk of Raynaud's syndrome and Carpal
tunnel syndrome:
• Wear gloves and keep your hands warm.
• Make sure the device is well maintained. A tool with
loose components or with damaged or worn dampers
is prone to increased vibration.
• Always hold the handle firmly, but do not grip it con-
tinuously with excessive pressure. Take breaks often.
All of the precautions indicated above cannot exclude the
risk of Raynaud's syndrome or Carpal tunnel syndrome.
Therefore, it is advisable in case of long-term or regular
use to monitor the condition of your hands and fingers
closely. Seek medical attention immediately if any of the
above symptoms appear.

Safety instructions

Attention! Read all instructions contained
herein. Failure to observe the following in-
structions may result in electric shock, burns
and/or severe injury. The term 'power tool'
used in the following includes both mains-
operated tools (with mains supply) and bat-
tery-operated tools (without mains supply).
KEEP THESE INSTRUCTIONS CAREFULLY!
1) Instructions regarding to safe handling
a) Wear goggles or properly fitted safety glass-
es, sturdy closed shoes with non-slip soles,
gloves, snug-fitting work clothes and ear
protectors (ear plugs or ear mufflers).
b) Minors should never be allowed to use an
electric trimmer. Never lend or rent your
electric trimmer without these operating
instructions.
c) Do not use the trimmer if other persons,
above all children, or animals are near the
working area.
d) Work calmly and stay alert. Operate the
trimmer under good visibility and daylight
conditions only.
e) Before using the machine, the line and ex-
tension cords have to be checked for signs
of damage or ageing. Do not use the trim-
mer when the cords are damaged or worn.
f) Do not use damaged power supply cords,
GB | Operating Instructions
2) Maintenance
3) General Instructions
GB-4
extension cords, couplings, plugs or cutting
heads.
g) Careless use can cause injuries to hand and
feet by the rotating cutting elements. Do not
switch on the unit when hands or feet are
near the cutting elements.
h) Never use metal cutting devices.
i) Only use original spare parts.
j) Remove the battery before testing, cleaning
or working on the machine and when it is
not in use;
k) Inspect cooling air slots on the motor hous-
ing at regular intervals for clog-ups and
clean as necessary.
a) Children should be under supervision to
ensure that they do not play with the device.
b) Any other work should be performed by
your dealer.
c) Never use metal cutting devices.
d) Clean the cutting head at regular intervals.
e) Check the condition of the cutting head at
frequent intervals. If the behaviour of the
cutting head changes (vibration, noise),
check immediately as follows: Switch off the
trimmer, hold it firmly and bring the cutting
head to a standstill by pressing it against the
ground. Then disconnect plug from power
supply. Check condition of cutting head -
look for cracks.
f) Have a damaged cutting head replaced
immediately - even if it only has superficial
cracks. Never attempt to repair a damaged
cutting head.
g) Inspect cooling air slots on the motor hous-
ing at regular intervals for clog-ups and
clean as necessary.
h) Clean plastic parts with a damp cloth. Do
not use aggressive cleaning chemicals.
i) Never hose down the electric trimmer!
j) Store trimmer indoors in a dry, high or
locked place and always keep out of reach
of children.
1. Read the instructions manual
2. Have your dealer or a specialist show you
how to operate your trimmer.
3. Before using the machine check that your
accu is in good condition and that there is
no damage. Never use the trimmer with a
damaged cutting head