Application - IKRA Mogatec GM LI-2025 Operating Instructions Manual

Grass Trimmer with Rechargeable Battery GM LI-2025
Technical Specifications
Operational voltage
Speed of rotation n
0
Mowing range Ø
Battery type
Max. operational time (idle speed)
Weight
Measured acoustic capacity level
Level of noise pressure
Vibration on the handle
Mains battery charger
Mains voltage
Charging voltage
Charging current
Period of charging
The machines comply with the safety class III.
Technical changes are reserved.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.

Application

The machine is exclusively intended for cutting decora-
tive lawn, i.e. lawn edges. Any other use or use going be-
yond that, such as the cutting of brushwood and hedges
or large areas of lawn, is considered improper use. The
manufacturer / supplier is not liable for damages result-
ing from such use. The risk is borne by the user alone.
A proper utilisation also includes the observance of the
operating manual and the compliance with the conditions
of control and maintenance.
Keep the operating manual always at hand near the
place the machine is used!
Residual risks
Even if the device is used properly, a residual risk that
cannot be eliminated persists. Due to the type and de-
sign of the device, the following potential dangers may
result:
- Contact with the unprotected part of the thread cutting
equipment (cutting injury)
- Contact with cutting thread while in operation (cutting)
- Contact with ejecting parts of the cutting thread, cut
material, and other materials (cutting injury, blunt
injury)
- Loss of hearing if required ear protection is not used
while working (hearing loss)
- Contact with electric current due to a defective or cut
GB | Operating Instructions
( according to EN 50636-2-91)
(according to EN 50636-2-91)
20 V DC
9000 min
-1
240 mm
Li-Ion 20 V / 2,0 Ah / 40 Wh
max. 70 min
2 kg
88,0 dB (A [
K=2,12 dB(A)
81 dB(A) [
K=3,0 dB(A)
≤ 2,5 m/s
2
100-240 V ~ / 50/60 Hz
21 V DC
500 mA
approx 3-5 hrs
supply cable (electric shock)
- Harmful emissions of cut material and cut particles.
If you do not observe the instructions contained in the
instruction manual, other residual risks may result due
to improper use.
The product is intended for persons who are 14 years old
and up. If the product is used by children who are 8 years
old and up or by persons with limited physical, sensory,
or mental capabilities or a lack of experience and knowl-
edge, then they must be supervised or informed regard-
ing how to use the device safely and to understand the
resulting dangers that are involved. Children are not per-
mitted to play with the device. Cleaning and maintenance
may not be completed by children without supervision.
Children should be supervised so that they do not play
with the device.
However, some residual risks remain despite the spe-
cific safety measures, safety instructions, and additional
safety regulations indicated in the operating manual, e.g.
commissioning the product unintentionally. If you do not
observe the instructions contained in the instruction man-
ual, other residual risks may result due to improper use.
Warning!
Prolonged use of a tool will subject the user to vibration
and shocks that could lead to Raynaud's syndrome or
Carpal tunnel syndrome.
GB-3
]
]