Pram Body Functions - teutonia TRIO Instruction Manual

6

Pram Body Functions

6.1 Pull the hood gently forward or backward to the desired position (as seen on the picture 6.1)
6.2 Engage the brake. To remove the pram body from the chassis, press the silver buttons on both sides of
the Pram body and lift up the pram body upwards.
6.3 When carrying the pram body, ALWAYS carry with both hands as seen in picture.
WARNING Before carrying the pram body, always check that the pram body is properly functioning and
correctly assemblied.
WARNING Always carry the pram body as illustrated. This is very important!
WARNING Never leave the pram body near the stairs, on the top of a table or in places where it can fall off.
WARNING Do not use the pram body as a cradle outdoors or on uneven surfaces.
WARNING Do not use the pram body as a bed for your child.
WARNING NEVER use the pram body as a Carrycot
WARNING Never leave child unattended
6.4 WARNING NEVER carry the pram body by the bumper bar as illustrated. This is very important!
6.5 WARNING NEVER carry the pram body by the hood as illustrated. This is very important!
6.6 WARNING NEVER adjust the position of the pram body as illustrated. This is very important!
WARNING The pram body must ALWAYS be in a flat horizontal position. This is very important!
6.7 WARNING Never use the pram body in the position with the hood placed towards the handlebar (see picture 6.7).
WARNING The hood on the pram body should always be placed away from the handlebar.
6.8 WARNING Never pull the pram when the swivel wheels are unlocked. The pram may wobble which can lead
to a safety risk if you are not cautious and careful.
Seat Unit Assembly
7
7.1 Place the seat unit fabric inside the frame. The backrest must be placed towards the seat reclining handle
WARNING Before you use the pram, check that the seat fabric is secure and that all the zips are firmly and
correctly in place.
WARNING It is important that the seat unit fabric is always fitted correctly.
WARNING Never use this product without fully assembling the seat unit fabrics onto the frame first.
7.2 Insert the plastic stick through the fabric opening and push inside the frame opening.
The 2 plastic sticks marked with "SHORT" must be inserted on the side with reclining handle , the 2 plastic
sticks marked with "LONG"must be inserted on the opposing side of the reclining handle. Repeat with all 4
plastic sticks.
7.3 "Click" in the plastic stick-handle in the frame opening. Repeat with all 4 plastic sticks.
7.4 Locate the 2 openings on the seat fabrics and the 2 buttons screwed on the frame (on both
sides)
42
Teutonia TRIO, v.1.1