Pram Body Folding - teutonia TRIO Instruction Manual

Pram Body Assembly
4.14 Click on the hood with the black fastening devices/hooks. Repeat on both sides.
WARNING Keep hands and fingers away when attaching the hood. Risk of crushing!
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING The hood must always be assembled correctly when the pram is in use.
4.15 Press the 2 press studs into place. Make sure that the "male" stud goes down under the frame. Repeat on
both sides.
4.16 Zip on the hood. Close the zipper between the hood and the pram body. Make sure the zip is closed all the way.
4.17 Pull the hood fabric down under the frame until it sits tightly secured. Pull the fabric over the seat recline handle.
4.18 Zip on the Apron fabric on the pram body. Make sure the zip is closed all the way.
4.19 Press the 2 studs into place. Repeat on both sides.
4.20 This is how the pram body looks when correctly assemblied (as illustrated in the picture 4.20).
4.21 For the Pram body, always use the longer adaptors attached to the chassis.
WARNING Never use the short adaptors with the pram body!
4.22 Attach the long adaptors to the chassis by pressing the silver button and sliding in the adaptor with a
slight push. Click the adaptors into the chassis, make sure it clicks in properly and securely. Repeat on both sides.
WARNING Keep hands and fingers away when attaching the adaptors. Risk of crushing!
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING Always check that the adaptors are properly fixed firmly to the chassis before the pram is used.
4.23 This is how the adaptor looks when correctly assemblied on the chassis (as illustrated in the picture 4.23).
4.24 Engage the brake. To attach the pram body, slide in the 2 plastic bars of the pram body in to the adaptors at
the same time all the way.
WARNING Always check that the pram body is properly attached on both sides.
WARNING Never attach the pram body with a child inside
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING The 2 plastic bars shall always be in the vertical position duirng use
4.25 This is how the pram body looks when correctly attached on the chassis (as illustrated in the picture 4.25).
4.26 To remove the fabric from the pram body frame first detach the hood, then use the silver tool and place it
in the hole and pull out the silicon stick. Repeat on all 4 sides.
WARNING Never detach the pram body fabrics with a child inside
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
.
5

Pram Body Folding

5.1 WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING NEVER fold the pram body with a child inside
5.2 Prepare to fold the pram body by pressing up the seat reclining handle and turn the 2 plastic bars all the way
5.3 Rotate the 2 "U-bows" towards the centre to fold the pram body
WARNING Ensure that children are kept away from all moving parts of the pram to avoid risk of injury.
WARNING NEVER fold the pram body with a child inside
WARNING Always remove the pram body from the chassis when folding
5.4 Press down on the pram body and hood to make it more compressed. The pram body is now folded.
Teutonia TRIO, v.1.1
41