Vixen AP Equatorial Mount Instruction Manual page 66

APPLICATION
09
While holding the DEC motor module, fix the declination body
securely with the two supplied M5-25mm long screws using the
4mm Allen wrench. Install the batteries, if necessary.
10
Replace the declination body cover with attention to the direction
of the hook on the cover.
11
Screw the threaded end of the counterweight bar into the threa-
ded hole on the vanity ring. After you fully tighten the vanity ring,
unscrew the counterweight bar by one rotation.
12
Screw the threaded end of the counterweight bar into the decli-
nation body. Attach the declination body fully and securely tighten
the up the vanity ring.
4mm Allen wrench 4mm Allen wrench
Counterweight bar Counterweight bar
Declination body Declination body
①
Counterweight bar Counterweight bar
66
Declination body cover Declination body cover
Vanity ring Vanity ring
②
Vanity ring Vanity ring