Vixen AP Equatorial Mount Instruction Manual page 16

PREPARATION
5
Attach the metal post on the t r ipod head. The metal post
is underneath the center column. Be sure to screw down
the metal post completely
6
Loosen the azimuth adjustment screws in advance by
turning the a zimuth adjus tment knobs on the mount base
so that a space is opened for the metal post between the
screws.
7
Position the mount so that the two azimuth adjustment
screws come above the metal post. Place the mount on
the tripod head so that the center projection on the bottom
of the mount fits the center hollow on the tripod head.
8
Holding the mount with one hand, raise the center column with the hand so that the
top of the column is fit the bottom of the mount. Turn the center column counter-
clockwise to screw the top of the column into the bottom of the mount until secure.
Post
Azimuth adjustment screw
Azimuth adjustment screw
Azimuth adjustment screws
Post
16
Post
①
②
Center column
③