Connecting The Star Book One - Vixen AP Equatorial Mount Instruction Manual

PREPARATION

Connecting the STAR BOOK ONE

The AP-SM mount package comes equipped with an RA motor module and STAR BOOK ONE controller as standard accessories.
1
Plug one end of the STAR BOOK cable into the connection port on
the mount.
2
Secure the connectors with the fixing screws.
3
Plug the other end of the STAR BOOK cable into the connection
por t on the STAR BOOK ONE.
4
Secure the connectors with the fixing screws.
Note 1: Hold the connector part of the STAR BOOK cable securely and pull it straight out when you unplug the cable.
Unplugging by grabbing the cable part may cause a wire to break.
Note 2: Avoid pulling or bending a part of the cable adjacent to the connectors. It may cause a wire to snap.
Note 3: Never connect the STAR BOOK cable to other equipment such as a PC. It may cause failure, fire or electrical shock.
(The STAR BOOK cable does not meet the RS232C specifications.)
Fixing screws
-
Fixing screw
25
Controller cable end
Fixing screw