Product Overview - newmotion Home Advanced Renault Edition Instruction Manual

3. PRODUCT OVERVIEW

3.1 MOUNTING, PACKAGE CONTENTS AND REQUIRED TOOLS
Wall mounting
Installation materials
& power setting
Installation &
configuration of
accessories
INSTALLATIEHANDLEIDING – P20
INSTRUCTION MANUAL – P20 | P20
Package contents with charge point
- Charge point;
- Rubber grommets (various sizes);
- 1 x M4 x 16 mm bolt (Torx);
- 6 x M4 x 12 mm bolts (Torx);
- 2 x Power cable clamps;
- 2 x UTP data cable inlet with rubber
seal
- Load Shedding module for Load
Shedding functionality;
- WiFi bridge
VERSION 0129NM02INT01
0720NM19INT03
Required tools & additional materials
(not provided)
- 4 x 6.3mm x 70mm Self Tapping pan
head Torx screws (DIN 7981C) stainless
steel (A4);
- 4 x plugs & rubber washers;
- 4 x Stainless steel (A4) washers;
- Drill and bit;
- Torx screwdrivers (T20);
- Voltage tester;
- Tape measure;
- Spirit level
- Power cable;
- Cable mount clips;
- RCD & MCB;
- For local configuration, a laptop with RJ45
connectors and UTP cable
- Power cable 5 x Ø 2,5mm;
- Cable mount clips;
- UTP cable (CAT5 or CAT6);
- RJ45 UTP cable crimp tool;
- RJ45 connectors;
- Shunt 3 options:
> ABB S2C-A2 in combination with S200
MCB or DS200 RCD
> Schneider IMX A9A26946 in
combination with ACTI9 RCD or MCB
> Legrand DX3 shunt trip (406278) in
combination with DX3 RCD or MCB