Table of Contents
Advertisement
If the display shows all light gray, you can spray
every area.
Using the Easy Mode with an
Existing Job
Note:
A job is set up in the standard mode. Ensure
any previous job information is deleted before
repeating an existing job.
1.
Start the machine and keep the key in the
position.
2.
Open the sprayer-controller icon
1. Sprayer-controller icon
3.
In the sprayer-controller screen, determine if the
correct rate (gal/ac) is selected.
4.
If the rate is not correct, change the rate with
the preset rates, incrementally or selecting
the current rate and manually entering the
application rate
(Figure
1. Current rate
2. Preset-rate icons
(Figure
Figure 14
15).
Figure 15
3. Decrease and increase
icons
4. Sprayer-controller icon
5.
Select the field menu icon.
6.
Select the name of the existing field
RUN
14).
g031532
1. List of existing fields
2. Field-list icon
7.
Select the job-menu icon
8.
Select the existing job
g031494
1. Job-menu icon
2. Job-list icon
9.
Turn the section switches, located between the
seats, to the
10
Figure 16
3. Field-menu icon
(Figure
17).
(Figure
17).
Figure 17
3. List of existing jobs
position
(Figure
18).
ON
(Figure
16).
g031533
g031534
Advertisement
Table of Contents
