Table Of Contents - Toro Multi Pro 5800 41623 Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
The GeoLink ® Precision Spray System automatically
controls the spray application rate and the spraying
area. The system monitors the area sprayed, the
speed of the vehicle, and the total volume of material
sprayed. You set the target volume per unit area to
spray and the spray system automatically maintains
the flow within the proper range of the vehicle speed
and continually displays the actual volume of material
per area sprayed.
Read this manual carefully to learn how to operate
and maintain your product properly. The information
in this manual can help you and others avoid injury
and product damage. Although Toro designs and
produces safe products, you are responsible for
operating the product properly and safely. You may
contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or
to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 1), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2017-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
Product Overview ..................................................... 4
Controls ............................................................. 4
Operation .................................................................. 6
Understanding the Different Display
Modes ............................................................. 6
Starting the Display ............................................ 6
Understanding the LED Lights ............................ 6
Using the Touch Screen...................................... 7
Using the Master Switch .................................... 7
Selecting the Correct Units of Measure ............... 7
Using the Easy Mode.......................................... 8
Recording Job Details........................................11
Exporting Job Information................................. 12
Setting up the System....................................... 13
Initially Testing the System................................ 13
Operating Tips ................................................. 14
Maintenance ........................................................... 15
Recommended Maintenance Schedule(s) ........... 15
Cleaning the Flowmeter.................................... 15
Cleaning the Display Screen............................. 15
Troubleshooting ...................................................... 16
2
Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g000502