Table of Contents
Advertisement
Figure 18
1. Boom switch, left boom
2. Boom switch, center boom
10.
To start spraying, turn the spray icon on the
screen and drive into the spray area
Note:
The machine will start spraying when the
sprayer crosses into the correct spray area.
Note:
The display shows areas to be sprayed
as light gray and non-spray areas as dark gray.
If the display shows all light gray, every area can
be sprayed.
Recording Job Details
The job menu selects or sets up specific job
information associated with the chosen area. Use
this menu to store information and record and report
activity.
Recording Job Information
1.
Select the job icon
2.
Select the record-job information icon
19).
3.
Select the categories as needed and enter and
confirm the information.
3. Boom switch, right boom
(Figure
(Figure
19).
(Figure
g030903
1. Job-menu icon
8).
2. Record-job information
icon
Recording Job Notes
Use the notes area to record any information for each
job.
1.
Open the job-information icon
2.
Select the job-notes icon
3.
Enter the information and confirm.
11
Figure 19
3. List of information to
change
(Figure
20).
(Figure
20).
g031535
Advertisement
Table of Contents
