Preparations; Connections - Aiwa XR-M200 Operating Instructions Manual

PREPARATIONS

CONNECTIONS

Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord.
• Both speakers can be connected as L (Left) or R (Right).
1 Connect the right speaker to the main unit.
1 Connect the speaker cord with the plug to the SPEAKERS
HIGH FREQ R terminal.
L
3
2 Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R 0terminal and the black cord
to the 9 terminal.
1
Right speaker
3
ENGLISH
01-04/XR-M200<U>/Eng
L
3
Speaker cord
3
2 Connect the left speaker to the main unit.
Connect the speaker cord with plug to the SPEAKERS HIGH
FREQ L terminal, and another speaker cord to the
SPEAKERS LOW FREQ L terminals in the same manner as
step 1.
3 Connect the supplied antennas.
Connect the FM antenna to FM 75
antenna to AM LOOP terminals.
4 Connect the AC cord to an AC outlet.
3
AM antenna
2
Left speaker
XR-M200
10/4/2000, 6:01 PM
terminals and the AM
AM LOOP antenna
FM antenna
3
FM antenna
Speaker cord
4
AC cord