Specifications - Aiwa XR-M200 Operating Instructions Manual

SPECIFICATIONS

Main unit XR-M200
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W H D)
Weight of main unit
15-18/XR-M200<U>/Eng
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 µV/m
Loop antenna
8 W + 8 W (200 Hz – 20 kHz,
T.H.D. less than 1%, 16 ohms)
10 W + 10 W (1 kHz, T.H.D. less
than 10%, 16 ohms)
0.15 % (5 W, 1 kHz, 16 ohms,
DIN AUDIO)
25 W + 25 W (35 Hz – 200 Hz,
T.H.D. less than 1%, 6 ohms)
30 W + 30 W (75 Hz, T.H.D. less
than 10%, 6 ohms)
0.15 % (12.5 W, 75 Hz, 6 ohms,
DIN AUDIO)
VIDEO/AUX: 0.4 V
MD: 0.4 V
LINE OUT: 0.4V
(47 kohms load)
SPEAKERS HIGH FREQ:
accept speakers of 16 ohms or
more
SPEAKERS LOW FREQ:
accept speakers of 6 ohms or
more
PHONES (stereo minijack):
accepts headphones of 32 ohms
or more
4 tracks, 2 channels stereo
CrO tape: 50 Hz – 16000 Hz
2
Normal tape: 50 Hz – 15000 Hz
50 dB (CrO tape peak level
2
above 1 kHz)
AC bias
Recording/playback head
Erase head 1
Semiconductor laser ( = 780 nm)
1 bit dual
75 dB (1 kHz, 0 dB)
0.1% (1 kHz, 0 dB)
Unmeasurable
AC : 120 V, 60 Hz
80 W
175 260 299 mm
1 7
(7 10 / 11 / in)
4 8
5.5 kg
(12 Ibs 2 oz)
18
Standby power consumption
Speaker system
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W H
Weight
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. lf this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
1
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
10/4/2000, 6:03 PM
If the power-economizing mode is
on: 1.0 W
If the power-economizing mode is
off: 12 W
3 way, built in subwoofer
(magnetic shield type)
Subwoofer:
1 /
130 mm (5 in) cone type
8
Full range:
100 mm (4 in) cone type
Super tweeter:
13
20 mm ( / in) ceramic type
16
6 ohms / 16 ohms
86 dB/W/m
D) 162 258 200 mm
1 1 7
(6 / 10 / 7 / in)
2 4 8
3.2 kg
(7 Ibs 1 oz)
ENGLISH
En
18