Shuffle Playback; Programed Playback - Aiwa JAX-N5 Operating Instructions Manual

Shuffle playback

Plays the tracks on one desired disc or all discs in random
order.
1 Press MODE repeatedly until "PLAY MODE?"
appears in the display in stop mode and then
press ENTER.
2 Turn MULTI JOG to select "SHUFFLE" and then
press ENTER.
" SHUF " lights up.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
3 To play one desired disc, press DISC DIRECT
PLAY 1-3.
To play all discs, press c (c /d on the
remote).
On the remote, press PLAY MODE repeatedly until " SHUF "
lights up and carry out step 3.
To cancel shuffle playback
Carry out step 1 and 2, and select "CONTINUE" in step 2.
On the remote, press PLAY MODE repeatedly until " SHUF "
and " PGM " disappear.

Programed playback

Plays back up to 30 selected tracks in programed order.
1 Press MODE repeatedly until "PLAY MODE?"
appears in the display in stop mode and then
press ENTER.
2 Turn MULTI JOG to select "PROGRAM" and then
press ENTER.
" PGM " lights up.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
3 Press DISC DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
On the remote, press DISC SKIP.
4 Turn MULTI JOG to select a track and then press
ENTER.
The selected track number and the program number appear
in the display.
On the remote, press r or t and then press ENTER
or press the numbered buttons:
-To select the 10th track, press 0/10.
-To select the 20th track, press +10, +10 and 0/10.
-To select the 25th track, press +10, +10 and 5.
5 Repeat step 3 and 4 to program other tracks.
6 Press c(c/don the remote).
On the remote, press PLAY MODE repeatedly until " PGM "
lights up and carry out step 3 to 6.
•During programed playback, you cannot select a disc or a
track with the numbered buttons.
•If the total playback time of the program exceeds 99:59
minutes, or if a track with a track number exceeding 30 is
programed, the playing time is displayed as "- -:- -".
•You cannot program more than 30 tracks. "FULL" is
displayed.
To clear a track
Press CLEAR on the remote in stop mode. A track is cleared
from the end of the program.
To clear the entire program
Press s in stop mode.
To add tracks to the program
Repeat step 2 and 3 before starting playback. The tracks are
added to the end of the program.
To cancel programed playback
Carry out step 1 and 2, and select "CONTINUE" in step 2.
On the remote, press PLAY MODE repeatedly until " PGM "
and " SHUF " disappear.
•The program contents are retained even if the program is
canceled or after programed playback finishes. The same
program plays back if you carry out step 1, 2 and 6.
Notes on CDs
•Do not place more than one disc on one tray.
•Do not tilt the unit with discs loaded.
En
11