Table of Contents
Advertisement
Attaching the Replacement Device Frame
After removing the original device frame, you are ready to attach the
replacement device frame.
1. Insert a corner of the device into the corresponding corner of the
device frame. Then push a corner on the same side of the device
into the frame.
2. Push a corner on the opposite side of the device into the
corresponding corner of the frame.
3. With three corners in the frame, insert the tip of the screwdriver
into the tab of the fourth corner of the frame.
4. Pull the tab away from the device until you can slide the corner of
the frame onto the device.
ChatFusion User's Guide
45
Advertisement
Table of Contents
