Table of Contents
Advertisement
Note: When "(Left)" or "(Right)" appears in a Switch 1 or Switch 2
setting, it does not affect how you should set up the switch. It only
refers to the internal technical configuration of the switch, which
you can disregard.
5. To set up Switch 1, tap Switch 1: .... The prompt "Press any switch"
will appear. Press the switch intended to start and stop the scan.
6. To set up Switch 2, tap Switch 2: .... The prompt "Press any switch"
will appear. Press the switch intended to make your choice or
activation.
7. Adjust additional scan settings as necessary. See the remaining
scanning sections of this user's guide.
To disconnect (unpair) the keyboard switch:
1. Select Menu > Settings > System > Bluetooth Settings > Connect to
Switch.
2. Select the name of the switch.
Note: If the device is no longer present, see the switch instructions
to remove any pairing.
ChatFusion User's Guide
149
Advertisement
Table of Contents
