Table of Contents
Advertisement
Symbols Do not Display in ChatEditor
When you install ChatEditor, the following message appears:
You must attach a PCS-configured NovaChat/ChatFusion device to enable and display PCS
Symbols.
Click OK to continue.
Choose OK to close the message. To enable symbols in ChatEditor,
simply connect a USB cable between your computer and your
device.
Test the Editor to verify that symbols are displaying. Then
disconnect the cable.
The device is in the charge pad, but the battery is not charging
Verify that the charge pad is plugged into an electrical outlet or
surge protector. If you are using a surge protector, make sure it is
turned on.
Verify that the charge pad's right LED is glowing blue. If the left LED is
glowing amber, the charger is plugged in, but the device is not
positioned correctly in the charger. Adjust the position of the device in
the charger until the right LED turns blue.
Texting conversations page doesn't show any conversations
Make sure the setting "Use with Phone" is turn on. On the device,
choose Menu > Settings > System > Bluetooth settings. Make sure
that Use with Phone is selected.
ChatFusion User's Guide
284
Advertisement
Table of Contents
