Table of Contents
Advertisement
Prompt Volume
Use the Prompt Volume option to set how loud the prompt is when
using the device's speaker or an earphone or headset. This allows you to
set a volume level for prompts that is different from the volume level
for speech.
Choose Menu > Settings > Input > Scanning > Auditory Prompts >
Prompt Volume. The Prompt Volume window will open.
To change the volume level, slide your finger along the Prompt Volume
bar or tap the bar at a specific point. Then choose OK.
Excessive volume or sound pressure level when using earphones or
headphones can cause hearing loss over extended periods of time.
Scanning Beep
If you prefer to hear a beep instead of an auditory prompt when you
scan a key, choose Menu > Settings > Input > Scanning > Auditory
Prompts > Scanning Beep.
Button Prompt
Note: Scanning Beep must be turned off to access this option.
The Button Prompt option determines whether the label or message is
spoken as the button prompt. To change the setting, choose Menu >
Settings > Input > Scanning > Auditory Prompts > Button Prompt and
select either Speak Label or Speak Message.
Row or Group Prompts
Since these prompts may be specific to each page, use Scan Editor to
name the rows or groups for prompting. For details, see
Scan
Editor" on page 163.
ChatFusion User's Guide
"Opening the
161
Advertisement
Table of Contents
