To charge the device:
1. Tap the device's power button to turn off the display.
2. Plug the charge pad's power cable into an electrical outlet—a surge
protector is recommended.
3. Plug the other end of the power cable into the power jack on the
edge of the charger.
4. Position the ChatFusion device's stand against the back of the
device.
Note: If a wheelchair mounting plate is attached to the back of the
device, leave it in place.
5. Center the device on the charger with the back of the device against
the charger. Charging should begin automatically.
ChatFusion User's Guide
28