Rcd Test - Time Delay - ADInstruments AD4112 Instruction Manual

_____________________________________________________________________

7. RCD TEST - TIME DELAY

Turn Instrument "ON" by pressing the "TEST-ON" button. The L.C.D. display
will come to the following Screen.
For a two to three seconds, the display will show the battery voltage.
The tester wait for voltage to be measured and phase selection can be
changed.
Phase selection has been changed so that testing will start on a
negative going edge.
The leads have been connected and the voltage between L-E is 234Vac.
©Copyright Abacanto Digital SA.
Manual de usuario AD4112
AD Instruments
20