Table of Contents
Advertisement
R
E
UD.
The rudder Expert menu allows for further refinement of the tail rotor gyro perfor-
mance. " RUD. EXPERT " screen from the " EXPERT MENU 3D " screen.
From 5/5
From the "Sens. Model" of
RUD. EXPERT screen 5/5
RUD. EXPERT screen 1/5
(1) RUD Ntr: Rudder servo neutral setting
This parameter is used to set the neutral position of the rudder servo.
Position the rudder servo arm as perpendicular as possible to the tail ro-
tor pushrod prior to making adjustments with this parameter. Move the
cursor to "RUD Ntr" with the [ /+] or [ /-] key and press the [Enter] key to
enter the setting mode. Adjust the neutral position with the [ /+] or [ /-]
key. When you finish adjusting, press [Enter] key to exit setting mode.
Setting ranges: -240 ~ 0 ~ +240
(2) EXP. AVCS / EXP. NORM: Rudder exponential
This parameter sets the feel of the tail rotor control around center. When
set to [0] the control curve is linear. Using a [+] value the tail rotor will be
more sensitive around neutral conversely, using a [-] value will soften the
feeling around neutral. The RUD EXP parameter in your transmitter can
also be used to tune the tail rotor to a desired feeling.
Setting ranges: -100 ~ 0 ~ +100%
M
XPERT
ENU (RUDDER GYRO EXPERT SETTING)
Go to 2/5 from any
cursor position
Sports = AVCS -60% / NORMAL -40%, 3D = AVCS -20% / NORMAL -20%>
:
:
Initial value: +0
Initial value: AVCS = -20%, NORM = -20%
74
:
Hide quick links:
Advertisement
Table of Contents
