Features - FUTABA CGY760R Manual

F
EATURES
• 3-Axis Gyro and Governor in one box.
• High speed operation and extremely low latencies result in greater stability.
• Low profile, small size, and light weight.
• Easy set-up and tuning the gyro and governor program using the GPB-1.
• Settings divided into Basic and Expert menus. The basic setting is for initial setting
and Expert setting is for more advanced settings.
• Firmware can be updated from a Windows based personal computer when used with the
optional CIU-2 or CIU-3 interface.
• S.BUS 2 compatible.
• CGY760R also has a combination of receiver functions.
• Gyro section
• Advanced and adaptive PID control loop is utilized.
• Simultaneous control of 3-axes (roll, pitch, yaw).
• Rudder (yaw) section:
• Capable of sensing angular velocity up to +/- 1,000 deg/sec.
• Compatible with 1520 μS Analog (70 Hz), 1520 μS Digital (280 Hz), and 760 μS
Digital (560 Hz) tail rotor servos.
• Feed Forward Option allows the CGY760R/CGY755 to consider other control
functions during operation. This results in more accurate corrections and precise
operation.
• Cutting edge control algorithm provides a consistent pirouette rate, precise op-
eration, and smooth yaw control in any flight condition.
• Aileron, Elevator (roll, pitch) section:
• Developed specifically for flybarless helicopters.
• Supports H3-120, H3-140, H3-90, H4-00, and H4-45 swash plate types.
• Governor section
• Advanced and adaptive PID control loop is utilized.
• High speed operation and extremely low latencies provide a more consistent and
accurate operation.
• Capable of governing head speeds from 700 rpm through 4,000 rpm
• Compatible with 1520 μS Analog (70 Hz) and 1520 μS Digital (280 Hz) throttle
servo types.
6