Titan T200/2 Operating Instructions Manual page 10

Start-up:
Settings, programming:
Operation, modes of operation:
Manual mode:
In manual mode individual actions for testing and trouble-shooting can be performed.
Furthermore, the manual mode serves to move the strapping head to its home position.
Automatic mode:
Automatic processing of all movements
T200/2
The strapping head must be put into service by qualified technical
personnel only.
Settings and programming of the strapping head must be carried
out by qualified technical personnel only.
Caution!
Danger of squeezing at the strap guides and the counter plate
during touch control of the cam gear.
In automatic mode it must be observed that no squeezing points
occur between the indeed equipment (e.g. roller conveyors) and
the movable strapping head.
B 010 - GB 22/10
10