Table of Contents
Advertisement
ET1301/1302/1303/1304 Programmable DC Electronic Load User Manual
Figure 2.7.1 Scan test setting interface
2.8 Battery Test
Battery test is commonly used to test the discharge performance of the battery. The electronic load
can work with constant current or constant resistance, which makes it easy to measure the discharge
capacity of the battery.
Operating instructions:
parameters setting interface; 2. Select the action item by rotating the knob; 3. Press [Enter] to switch set
options for non-numeric parameters. 4. As for the setting of numeric parameters, please refer to 1.4
Numeric Parameter Settings for details. 5. Press【Esc】to return to the main interface of battery test. 6.
Press [On/Off] to turn on or off the mode.
Hangzhou Zhongchuang Electronics Co., Ltd.
1. Press [Menu] in the main interface of battery test to enter the battery
Figure 2.8.1 Battery test setting interface
Figure 2.8.2 Battery test main interface
Figure 2.7.2 Scan test interface
12
Advertisement
Table of Contents
