Setting The Clock - Aiwa FR-CD2500 Operating Instructions Manual

2,3,
4,5
12

SETTING THE CLOCK

1 Connect the AC power cord to a wall outlet a.
BAND/
SUMMER T./
D.S.T.
2 Press MEMORY/SET.
1
3 While day of the week flashes, press r or t to set
3,4,5
4 While the hour is flashing, press r or t to set the
5 While the minutes are flashing, press r or t to set
To change the clock setting
Keep MEMORY/SET pressed for 2 seconds while the clock is
displayed.
Day of the week starts flashing, then repeat the procedure
from step 3.
To adjust the time for Daylight-saving time
Keep BAND/SUMMER T./D.S.T. pressed for 3 seconds while
the power is turned off.
When Daylight-saving time ends, keep BAND/SUMMER
T./D.S.T. pressed for 3 seconds again.
the display.
The clock display begins flashing. If the clock is not
displayed correctly, disconnect the AC cord and remove the
backup battery if inserted. Then, connect the AC cord and
insert the backup battery again.
Day of the week starts flashing.
day of the week, then press MEMORY/SET.
mon: Monday / TUE: Tuesday / WEd : Wednesday / THU :
Thursday / Fri : Friday / SAT: Saturday / SUn : Sunday
The hour starts flashing.
hour, then press MEMORY/SET.
To change the hour faster, keep r or t pressed.
The minutes start flashing.
the minutes, then press MEMORY/SET.
The clock starts from 00 seconds.
appears in the display and the time advances by 1 hour.
English
disappears from