FP PostBase Dynamic Scale Operator's Manual page 23

On the Feeder plus
On the Dynamic Scale
On the franking machine
Remove jammed letters
On the Feeder plus
On the Dynamic Scale
On the franking machine
How to remedy a letter jam
• Remove the letter stack from the
Ramp plus.
• Press the release button. The roller trans-
port moves upwards.
• Fold the hood upwards.
• Unlock the drawer (push the drawer latch
lever upwards) and pull it to the front, out of
the housing.
• Carefully take all letters out of the franking
system.
• Make sure no shreds of paper or the like
are left in the letter path.
After remedying the letter jam
• Press down firmly on the roller transport
until it clicks into place.
• Fold the hood down.
• Slide the drawer in to the stop. Make sure
that the drawer latches correctly on both
sides.
• Confirm error message(s).
• Insert the letter stack once more.
You can also find more information on allevi-
ating a letter jam in the reference guide.
Tips for troubleshooting
23