Maintenance And Care; Cleaning The Dynamic Scale - FP PostBase Dynamic Scale Operator's Manual

5

Maintenance and care

5.1

Cleaning the Dynamic Scale

Warning! Electrical hazard. Disconnect all power plugs of the
PostBase Vision franking system with Dynamic Scale before cleaning the
franking system.
Warning! Electrical hazards due to short circuits. Be extremely careful when
handling fluids. Take special care that no foreign objects penetrate the sys-
tem's interior. If this should happen, have the franking system checked by FP
Customer Service before using it again.
• Turn off the franking system.
3 seconds
• Unplug the power plugs of the franking
• Clean any dirt off the housings with a
When cleaning the housing parts and letter
receiving tray, you can use the cloths and
cleaning spray from the FP cleaning set.
Note: Avoid soaking the conveyor belts with
the cleaning spray.
machine, the Dynamic Scale and the
Feeder plus from the power outlets.
slightly damp cloth. You can also use a
commercially available dishwashing deter-
gent.
Maintenance and care
17