General; On This Document; Symbols / Abbreviations Used; Important Information When Working With Irma Matrix Sensors - IRIS IRMA MATRIX R2 Mounting Manual

4/22 IRMA MATRIX R2 Option Door Contact | Mounting Manual
released
1

General

1.1

On this document

This document describes the additional operations required for the installation of IRMA
MATRIX sensors with a door contact magnet. It does not replace the IRMA MATRIX
installation manual. In addition to this description, please observe the information on
mounting and installation in the IRMA MATRIX installation manual.
1.2

Symbols / abbreviations used

"Please note"
"Caution!" - Can result in defects
"See Annex"
"Instructions"
"Please contact iris-GmbH"
The setting parameters or control elements of a software program are marked as shown on
"Door Polarity"
the left.
iris product designation
M12CAN-CON-03
Connector (f) Female connector
Connector (m) Male connector
x Variable cable executions or variable cable lengths
ETH /CAN Ethernet / Controller Area Network
PoE Power-over-Ethernet
A cove is a vehicle interior lining - here in particular above the door, into which the sensor is to be
Cove
fitted.
1.3 Important information when working with IRMA
MATRIX sensors
IRMA MATRIX sensors must only be installed by qualified expert staff trained by iris GmbH
and observing the pertinent regulations and the installation manual.
Rev. 1.5 2018-02
"Worth knowing"
"Information"
"See document on our website"
"Please note down"
"Download"