Quick User Guide – IRISNotes This Quick User Guide helps you get started with IRISNotes The descriptions in this documentation are based on the Windows 10 Operating System. Please read this ® guide before operating this scanner and its software. All information is subject to change without prior notice.
Quick User Guide – IRISNotes 1. Introduction IRISNotes is a pen and mobile note taker. With IRISNotes your handwritten notes and drawings can be turned into editable text on your PC. From there it can be sent to your favorite text processor (Word, Outlook, Notepad).
Page 4
Quick User Guide – IRISNotes Smart Pen Insert the Mini USB cable to connect the pen to a computer for charging. Mini USB port Note: disconnect the pen after about 3.5 hours. The LED is on during charging, off when the pen is fully LED indicator charged and blinks when the battery is low.
Quick User Guide – IRISNotes 4. Preparing the IRISNotes pen Warning: do not try to dismantle the pen. This may damage it. 4.1. Charge the pen battery Connect the pen to your computer using the provided mini USB cable. Important: make sure your computer is powered on.
Quick User Guide – IRISNotes 5. Writing Notes Important: make sure the receiver is disconnected from your computer when writing notes. Step 1 Clip the receiver unit to a sheet of paper. IRISNotes supports pages up to A4 size. Tip: always place the unit at the top center of a page. Step 2 Press the power button for 5 seconds to power on the receiver.
Quick User Guide – IRISNotes 6. Using the IRISNotes Software 6.1 System Requirements Windows Computer and processor 1 GHz processor or higher. Memory Minimum 512 MB RAM. 1 GB recommended. Hard disk Minimum 300 MB of free hard disk space. Operating System Windows 10, 8 and 7.
Quick User Guide – IRISNotes 4. Click File > Upload to upload all the notes stored on the receiver. Or click the upload icon ( 5. All the notes are uploaded to the My Notes folder. 6.2.3 View and Edit Notes in Note Manager 1.
Quick User Guide – IRISNotes 6.2.4 Convert Notes to Editable Text 1. Open a note you want to convert in the Note Manager application. 2. Click the convert icon in the toolbar. Or right-click a note and select Convert To Text. Attention: the Note To Text command does not work.
Page 10
Quick User Guide – IRISNotes 5. Now select the Conversion settings: Conversion Page Range Select whether you want to convert All pages, the Current Page or specific Pages. Content Type Keep Rich text selected. Handwriting Style Select in which style your notes are written: Capital letters, Handprint or Natural handwriting.
Page 11
Quick User Guide – IRISNotes Export as E-mail: opens the converted note in your default E-mail application (if configured). Export as Document: opens the converted note in your default word processor. Export as Text: opens the converted note in Notepad. For more information about MyScript Notes Lite, click Help >...
Quick User Guide – IRISNotes 7. Using IRISNotes as mouse You can also use the IRISNotes pen as mouse. To switch to mouse mode: Connect the receiver to your computer using the provided USB cable. Hold the pen right in front of the receiver, then press the power button once. ...
Quick User Guide – IRISNotes 10. Compliance RoHS and WEEE Compliance This product is compliant with RoHS Regulations of the European Parliament and Council Directive on the Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (2011/65/EU), and with the Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU).
Need help?
Do you have a question about the IRISNotes 3 and is the answer not in the manual?
Questions and answers