BP reading display /
Problem
Batteries are low.
appears
appears
or
Batteries are depleted.
the monitor is turned
off unexpectedly
during a
measurement.
Nothing appears on
the BP reading
display of the
Battery polarities are not properly aligned.
monitor.
Blood pressure
Blood pressure varies constantly. Many factors including stress, time of day, and/or how you apply the arm cuff,
readings appear too
may affect your blood pressure.
high or too low.
Review sub-sections 2.3, 3.1 and 3.2.
Press the BP [START/STOP] button to turn the monitor off, then press it again to take a blood pressure
Any other problems
measurement. If the problem continues, remove all batteries and wait for 30 seconds. Then, reinstall batteries.
occur.
If the problem still persists, contact your OMRON retail outlet or distributor.
Possible Cause
11. Error Messages and Troubleshooting
Solution
Replacing all 4 batteries with new ones is recommended.
Refer to sub-section 2.1.
Immediately replace all 4 batteries with new ones.
Refer to sub-section 2.1.
Check the battery installation for proper placement.
Refer to sub-section 2.1.
EN
EN49