Omron HEM-7530T-E3 Instruction Manual page 21

Automatic upper arm blood pressure monitor + ecg complete
Hide thumbs Also See for HEM-7530T-E3:
Table of Contents

Advertisement

2. Preparation
3. Close the battery cover securely.
Note
• When the "
recommended you replace batteries.
• To replace batteries, turn your monitor off and remove all batteries. Then replace with 4 new alkaline batteries at the same time.
• Before taking blood pressure measurements, your monitor needs to be set with the correct date and time.
The date and time are automatically set when you pair with and/or transfer your blood pressure readings to your smartphone.
However, the date and time will only be set for future blood pressure measurements taken after the blood pressure reading that
was transferred, it will not be saved as the blood pressure reading that was just transferred. For pairing or transferring
instructions, refer to sub-section 2.2.
• Replacing batteries will not delete previous blood pressure readings.
• The supplied batteries may have a shorter life span than new batteries.
• Disposal of used batteries should be carried out in accordance with local regulations.
Caution
• Make sure the battery compartment is securely closed with the battery cover when recording an ECG. If the battery cover is not in place,
recording an ECG may not be successful. If you have lost the battery cover, contact your OMRON retail outlet or distributor.
EN20
" symbol appears on the BP reading display, it is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents