Omron HEM-7530T-E3 Instruction Manual page 43

8. Other Settings of the Monitor
8.2 Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the instructions below. Make sure that your monitor is turned off.
1. While holding the
[START/STOP] button for more than 10 seconds.
2. Release the
"CLr" appears on the BP reading display.
Your monitor reverts back to the default settings.
3. Press the BP [START/STOP] button to turn your monitor off.
Note
• Reverting to the default settings of your monitor does not delete the information in the app.
• Your monitor will automatically turn off after 2 minutes.
• You will need to re-pair your monitor when using the monitor again. Without re-pairing, your blood pressure readings will not be
transferred to your app.
EN42
button down, press and hold the BP
button and BP [START/STOP] button when