Specifications; Technical Specifications - GarrettCom Magnum P62F Series Installation And User Manual

Magnum P62F-Series Ethernet Switches
1.0

SPECIFICATIONS

1.1

Technical Specifications

Ports Performance
Fiber, and when an auto-negotiating port is operating at 100Mbps:
Data Rate: 100Mbps
When an RJ-45 auto-negotiating port is operating at 10 Mbps:
Data Rate: 10 Mbps
Network Standards
100Mb: Ethernet IEEE 802.3u, 100BASE-TX, 100BASE-FX
10 Mb: Ethernet IEEE 802.3, 10BASE-T
Auto-sensing for speed: IEEE 802.3u
Packet-Processing Between Domains
Filtering and Forwarding Rate from 100Mbps ports: 148,800 pps max
Filtering and Forwarding Rate from 10 Mbps ports: 14,880 pps max.
Processing type: Store and Forward
Auto-learning: 16K address table, shared for all traffic domains
Packet buffers: 1.0Mb, dynamically shared on all domains
Latency (not including packet time):
Path Delay Value: 50 BT on all ports
Maximum Ethernet Segment (or Domain) Lengths
10BASE-T (Unshielded twisted pair)
100BASE-TX (CAT 5 UTP)
100BASE-FX, full-duplex: (multi-mode)
100BASE-FX, full-duplex: (single-mode)
100BASE-FX, full-duplex: (single-mode, long)
Operating Environment
Ambient Temperature: 40°F to 160°F (-40°C to 70°C)
Plenum rated, cold start down to 20°C
Storage Temperature: -40° to 185°F (-40°C to 85°C)
Ambient Relative Humidity: 10% to 95% (non-condensing)
Altitude: up to 15,000 ft. operating
)
Power Supply (Internal 24VDC and -48VDC Power Supply
Power Input Voltage: 20 to 70 VDC (auto-ranging), "-, GND, +"
Power Consumption: 10 watts typical.
DC-DC Converter Rating: 5VDC, 2Amps
)
Power Supply (External 125VDC Power Supply (PSX-T) for P62F-5V
Power Input Voltage: 100 to 275 VDC (nominal rating of 125VDC)
Power Consumption: 15 watts typical.
DC-DC Converter Rating: 5VDC, 3Amps
www GarrettCom com . .
Installation and User Guide (11/01)
µ
100 to 10 Mbps: 5 s
µ
10 to 100Mbps: 5 s
- 100 m (328 ft)
- 100 m (328 ft)
- 2.0 km (6,562 ft)
- 20.0 km (65,620 ft)
- 40.0 km (131,240 ft)
2