Safety Around The Top-Strigle - HE-VA Top-Strigle Operating Instructions Manual

Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 m
Do not operate the machine, if any people** are at risk in the dangerous area.*
When persons are at risk in the dangerous area (e.g. when doing adjustments, maintenance or connect or
disconnecting), the following points must be met:
• Lower the machine on solid ground.
• Hydraulics must be relieved.
• Tractor must be turned off, and the key removed.
• Driver must be aware of, when operating that there is no persons at risk in the dangerous area.
* Dangerous area: At the machine and underneath it, and in a distance of 4 m from it.
** People at risk: Any person, who is completely or partially in the dangerous area.
Most accidents when operating the machine, transporting and doing maintenance occurs, when avoiding the
most simple safety regulations.
For this reason, it is of highest importance, that any person who is operating the machine, strictly follows the
safety regulations and other instructions, which belongs the machine.
The machine must only be operated, maintained and fixed by persons, who is confidential with and skilled
for this work and is aware of moments of danger, which can occur.
ATTENTION!! Rotating parts and clothes in a loose condition, is a dangerous combination.
IMPORTANT!! It is strictly prohibited for any person to take place on the frame or chassis
of the machine, when it is either operating or the tractor is idling.
Instructions for transport at public roads:
Before transport at public roads, make sure that the attachment of the implement to the tractor, is in
accordance with the local rules and regulations in force (permitted total weight, permitted axel load,
transport width, lights and warning signs).
When driving at public roads, the tines must be folded towards the frame. This will reduce the width
of the machine substantially.
Front axel load
:
When the implement is attached and at maximum load, the tractors driving properties must be ensured.
Check that the front axel is sufficiently loaded. The front axel load must be at least 20% of the tractors
weight. Permitted axel load and total weight for the tractor must be respected.
NB! The driving, controlling and braking properties are affected by the attached implement.

Safety around the Top-Strigle

3
5 bars 11-02-2021
Back to the table of contents