Technical Specifications; Working With The Top-Strigle - HE-VA Top-Strigle Operating Instructions Manual

Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 m

Technical specifications

Working
width
3,00m rigid
4,00m rigid
4,00m hydr.
5,00m hydr.
6,00m hydr.
7,00m hydr.
8,00m hydr.
Tyre pressure
Oil pressure
Hydraulic outlets
Quick couplings, standard
Hydraulic oil: The machine is filled with
There is no standard tine angle recommended. The operator may adjust to achieve the desired results. The
following issues listed must be taken in consideration:
• Actual settings will vary with tine wear
• Ensure frame is leveled horizontal
• Operate with the lift hydraulic in float position
• For best results in stubble operate at 14 - 18 km/h, in pasture 8 - 12 km/h
• A more aggressive tine angle will hold up straw for a longer period, allowing for a more even
distribution of residue
• Breaking down straw is much more effective in dry conditions
• A second pass may be required in extremely heavy straw conditions. Then work the second pass at a
30° - 45° angle to how it was worked the first time
• To prevent tine damage, avoid tight turning
Transport
Tine size
width
12mm 3050
16mm 3050
12mm 4050
16mm 4050
12mm 1500
16mm 1500
12mm 1500
16mm 1500
12mm 1500
16mm 1500
12mm 1500
16mm 1500
12mm 1500
16mm 1500

Working with the Top-Strigle

Transport- No. of
height tines
1500 50
1500 36
1500 66
1500 48
2100 66
2100 48
2600 82
2600 60
3100 100
3100 72
3600 116
3600 84
3600 132
3600 96
3,8 bar / 55 psi
min. 150 bar
2 double acting
Sterling type E 402
Hydro Texaco HD32
2
5 bars 11-02-2021
HP
Weight in kg
requirement
85-110 840
95-115 930
100-125 1060
110-135 1170
100-125 1480
110-135 1590
120-145 1660
130-155 1780
140-170 1840
155-180 1950
160-195 2020
190-230 2150
175-225 2240
225-275 2390
Back to the table of contents