Council Directive 2006/42/EC. The declaration comprises the following machines: Grass-Combi with 2 or 3 bars for tines 6,0m hydraulic foldable Nykøbing the 23rd March 2020 Villy Christiansen The undersigned is furthermore authorised to compile technical documentation for the above machine.
Machine description The Grass-Combi is a 2 or 3 bar strigle which is suitable for aeration of pasture, and loosen crop residue for faster degradation. The machine can only be delivered as a tail-mounted model. The machine can only be mounted with one type of tines: •...
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Instructions for transport at public roads: Before transport at public roads, make sure that the attachment of the implement to the tractor, is in accordance with the local rules and regulations in force (permitted total weight, permitted axel load, transport width, lights and warning signs).
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Safety and other markings on the machine Study the Operating Instructions thoroughly before any operation of the machine and observe all safety instructions. Plate with number and year of manufacture. Plate with number and year of manufacture.
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 • Pins and bushings with lubrication nipples must be greased every 25 hours of operation. • Eventually damages at the paint must be rapaired at least once in the season. This will preserve and make the machine stay in a good condition for many years.
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Take care and be careful not to get your feet outside the small step when filling seeds in the tank Disposal When, after many years of use, the machine is to be regarded as end-of-life, it must be disposed of to a registered and approved product dealer.
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Spare parts list Main components Below here is a 2-bar model illustrated. Next page is a 3-bar model illustrated with main components defined. Back to the table of contents...
Page 12
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Pos. Part no. Description 2 bars 3 bars 1335170 Middle frame 1335010 Middle frame 1335157 Wing, left 1335145 Wing, left 1335158 Wing, right 1335147 Wing, right 690200060 Hydraulic cylinder 70/40 - 500 1335018 Socket for Multi-Seeder Multi-Seeder 410 l, w/16 dispensers 90°...
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Pos. Part no. Description 2 bar 3 bar 1335010 Middle frame for 2 bars model 1335170 Middle frame for 3 bars model 690200040 Cylinder 70/40 - 500 1335060 Holder for fan 0264090 Lock-nut M16 0272290 Facet washer Ø16...
Page 16
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Back to the table of contents...
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Pos. Part no. Description 2 bars 1335146 Wing left 1335148 Wing right (ikke vist) 1335141 Bar left rear 1335142 Bar left front 1335143 Bar right rear (ikke vist) 1335144 Bar right front (ikke vist)
Page 18
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Back to the table of contents...
Page 19
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Pos. Part no. Description 3 bars 1335157 Wing, left 1335158 Wing, right (not shown) 690200040 Cylinder 50/30 – 155 1335163 Bar, left rear 1335164 Bar, left middle 1335165 Bar, left front 1335166 Bar, right rear (not shown)
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Leveling bars Back to the table of contents...
Page 21
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 2 – 3 bullet Pos. Part no. Description 1335191 Leveling bar, left 1335192 Leveling bar, center 1335193 Leveling bar, right 0235380 Bolt M12x50, 8.8 fzb 1335027 Holder f/leveling bar right (only on center section)
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Platform foldable Machines with Pos. Part no. Description Multi-Seeder 1335076 Frame right part 1335073 Frame foldable right part 0487007 Step Panel 200x400x45 galvanized 0234750 Set Screw M8x20 8.8 690103057 Set Screw M8x50 8.8 1272250 Facet washer Ø8...
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Support wheel Back to the table of contents...
Page 25
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Alle models Pos. Part no. Description 1335040 Support wheel complete, facing left (2 stk. pr. maskine) 1335057 Support wheel complete, facing right (2 stk. pr. maskine) 0394230 Wheel complete w/rim and tire 1103505...
Grass-Combi 6,0m 2 and 3 bars 29-04-2020 Extension hoses to a connected roller Pos. Part no. Description Standard Optional Hydraulic hose 1/4” L = 2500 mm 690201033 Hydraulic hose 1/2” L = 2500 mm 690201469 690204512 Fitting straight Ø15 x 1/2”...