Settings In The Telephone - Mitel 6863 Quick Reference Manual

Mitel 6863 Quick Reference Guide
Call Park Pool
You can park a call and transfer the call at a specific
directory number (also called Call Park Pool) and any
extension can pick up the call. If the call is not picked up
within a few minutes, the call will recall your extension.
Transfer the call to You have an active call. Press the
the call park pool: Transfer key to put the call on
hold. Dial the number to the call
park pool. Note the number (here
called B-number) that shows up on
the display. Press the Transfer key
to transfer the call.
Inform the person that shall take
the call that he/she shall pickup the
call on number (B-number).
Pick up a call that is Dial the B-number that you
parked in the call received from your collegue. When
park pool you hear the busy tone press 8 to
pick up the call
France: 0
New Zealand: 4
Sweden: 6
Voice Mail
Messages/Voice Mail
A voice mail system may have been set up by the
system administrator. Contact the system administrator
to get the number to the voice mail system.
Call voice mail system Dial the voice mail system number
(e.g. record greeting
announcement):
Listen to received The message waiting lamp is slowly
messages: blinking when there is a pending
message.
*32# Press Dial to listen to it.
8

Settings in the Telephone

Volume
Adjust the listening
Press
volume of the:
- Handset
- Headset
- Ringer
- Hands-free
Mute
Mute microphone
Press
during call:
Silent ringing: Press
the text "Ringer volume is off" is
shown
Note: The ring signal is switched off permanently
Display Language
Change display
language: Language > Screen Language
Enter *08*n# to inform the sytem
about the language
Press Dial
n = language number. Contact the
system administrator.
Change keypad Preferences >
characters: Language > Input Language
Time and Date
Set time format:
and Date > Time Format
Set date format:
and Date > Date Format
several times until
Preferences >
Preferences > Time
Preferences > Time
MX-ONE – Mitel 6863