Related Manuals for Bowers & Wilkins HTM6 S2 Anniversary Edition
Summary of Contents for Bowers & Wilkins HTM6 S2 Anniversary Edition
- Page 2 Welcome and thank you for choosing Bowers & Wilkins. Our founder, John Bowers, believed that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and inspires every product we design. This is a high performance product that rewards thoughtful installation, so we suggest that you take some time to read this manual before you begin.
- Page 3 1. Unpacking Carton Contents Environmental Information This product complies with international directives, including but Check in the carton for: not limited to: 1 Foam plug 4 Self-adhesive rubber supporting feet i. the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, ii.
- Page 4 2. Positioning 0.5m – 1m 0.5m – 1m Speaker Installation Stray magnetic fields If using a projector with an acoustically transparent The speaker drive units create stray magnetic fields that extend screen, place the speaker behind the centre of the screen. beyond the boundaries of the cabinet.
- Page 5 3. Connections All connections should be made with the audio equipment Ensure that the positive terminals on the speaker (marked + and switched off. coloured red) are connected to the positive output terminal on the amplifier and the negative terminals on the speaker (marked – and There are 2 linked pairs of terminals on the back of the speaker.
- Page 6 4. Fine Tuning Before fine tuning, make sure that all the connections in the If the bass seems uneven with frequency this will most probably installation are correct and secure. be a consequence of the acoustic properties of your listening room.
- Page 7 5. Running In 6. Aftercare The performance of the speaker will change subtly during the The cabinet surfaces will usually only require dusting. If you wish initial listening period. If the speaker has been stored in a cold to use an aerosol or other cleaner, apply the cleaner onto the environment, the damping compounds and suspension materials cloth, not directly onto the product and test a small area first, of the drive units will take some time to recover their correct...