Relc Relc Command - Colby Instruments PDL-100A Operating And Programming Manual

Chapter 6
RELC RELC
Toggles (turn on and off) all relays for the specified number of
cycles.
Command
Syntax RELC arg
Example RELC 50
Returns None
HP : OUTPUT 705;"RELC 50"<NL>
Programming
NI : CWGPIB.Write "RELC 50"
Example
© 2010 Colby Instruments. PDL-100A Operating and Programming Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
arg is the number of cycles to toggle relays
System Commands
COMMAND
Page 57