Chapter 6
INC
INCREMENT
Increment the delay setting by step size amount.
Command
Syntax INC
Example INC
Returns None
HP : OUTPUT 705;"INC"<NL>
Programming
NI : CWGPIB.Write "INC"
Example
MODE
MODE
Set the operating mode for the PDL-100A.
Command
Syntax MODE [SER | PAR | 312.5ps | 625ps]
MODE 312.50ps
Example
MODE SER
MODE 625PS
None
Returns
HP : OUTPUT 705;"MODE SER"<NL>
Programming
NI : CWGPIB.Write "MODE PAR"
Example
© 2010 Colby Instruments. PDL-100A Operating and Programming Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SERIAL mode step size increment is 0.50 ps
PARALLEL mode step size increment is 0.25 ps and
total delay range is 0 to 312.50 ps.
SER
Set the PDL-100A to Serial Trombone Mode
PAR
Set the PDL-100A to Parallel Trombone Mode
312.5ps
Set the PDL-100A to Parallel Trombone Mode
625ps
Set the PDL-100A to Serial Trombone Mode
System Commands
COMMAND
COMMAND
Page 49