The Mt-100A Menu Keys - Setup - Colby Instruments PDL-100A Operating And Programming Manual

Chapter 4
4.3.0 The MT-100A Menu Keys – SETUP
SETUP SETUP button
1=ADDR, 2=MODE
3=TERM ?
1 ENTER
Setup Device Address
© 2010 Colby Instruments. PDL-100A Operating and Programming Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setup PDL-100A Device Addressing
1 = Setup Device Address
2 = Set Device Mode
3 = Toggle Terminal Mode
1=GPIB, 2=VER
3=NET ?
Display current GPIB Address
1 ENTER
2 ENTER
Display current SW version
3 ENTER
Setup Network Address
1 ENTER
Display current TCP/IP address and enter new address.
2 ENTER
Display current GATEWAY address and enter new address.
3 ENTER
Display current NETMASK and enter new NETMASK
4 ENTER
Display DHCP mode and enter new DHCP mode
Setting Delay Values
1=IP,2=GW,3=NM
4=DHCP,5=PORT ?
192.168.100.8 ?
192.168.100.1 ?
255.255.255.0 ?
OFF,1=ON,2=OFF?
Page 16