Segway PT Product Orientation
Step 10: Securing Your Segway PT
The Segway PT provides a Security function in case
you need to leave your Segway PT unattended. The
Security function includes an alarm and uses the
motors to make it difficult to move your Segway PT.
The best way to discourage tampering with your
Segway PT is to keep it in a secure indoor location
with the InfoKey Controller stored separately. The
Security function is intended for use when you remain
in the general area of the Segway PT and are able to
respond to an alarm. If you must leave your
Segway PT unattended in a location that is not
secure, activate the Security function with your
InfoKey Controller, use a lock and take the InfoKey
Controller with you.
To set the Security function:
Step off your Segway PT.
Press the Security button on the InfoKey
Controller. The Segway PT provides an audio
indication that the Security function is
activated and a lock icon displays on the
InfoKey Controller:
Be sure to take your InfoKey Controller with
you (do not leave it with the Segway PT).
To deactivate the Security function, press the
power button to turn the InfoKey back on.
Then press the Security button on the InfoKey
Controller. The Lock icon on the InfoKey
Controller disappears and the Security
function is no longer activated.
Step 11: Powering Off the Segway PT
Power off the Segway PT by pressing and holding the
Power/Standby button on the InfoKey Controller for
two seconds.
The display on the InfoKey Controller will show a
sleepy face and the Segway PT S will emit a tone as
the Segway PT powers off.
Page 22 of 29
Coach's Manual
Security Function discourages
tampering, but is not an "anti-theft"
mechanism. Use it as a deterrent.
Show Rider how to set and to
deactivate the Security Function.
While the Security Function is set,
show the Rider what happens
when you try to move the Segway
PT.
Show Rider how to Power Off and
let Rider perform action.
p/n __________________
© Segway Inc. 2015 All rights reserved
> i2 > x2
Need help?
Do you have a question about the i2 SE and is the answer not in the manual?