Segway i2 SE Manual page 11

Segway PT Product Orientation
For the Rider:
1. Make sure the Segway PT is in Balance Mode.
2. The rider should stand on the Mats with the
Segway PT remaining stationary.
3. The Coach should firmly hold the Segway PT,
ready to keep it steady and stationary when
the Safety Shutdown begins.
4. The Coach or a third person may then press
and hold both the Information Display button
and the Power/Standby button simultaneously
until the Safety Shutdown initiates.
5. The Coach must continue holding the
Segway PT so it does not move.
6. The rider must step off the Segway PT before
10 seconds elapse. After 10 seconds, the
Segway PT will immediately shut down when
the Wheels reach zero speed.
Page 11 of 29
Coach's Manual
The Coach spots the Rider as the
Rider experiences a Safety
Shutdown.
p/n __________________
© Segway Inc. 2015 All rights reserved
> i2 > x2