Huawei SUN2000-(2KTL-6KTL)-L1 User Manual page 42

SUN2000-(2KTL-6KTL)-L1
User Manual
Procedure
Step 1 Crimp an OT terminal.
Figure 5-2 Crimping an OT terminal
(A) Core wire
(D) Hydraulic pliers
Step 2 Connect the PE cable.
Issue 03 (2020-09-15)
NO TICE
must wrap the core wires completely. The core wires must contact the OT
terminal closely.
heat shrink tubing is used as an example.
NO TICE
a reserved ground point.
Copyright © Huawei Technologies Co., Ltd.
(B) Insulation layer
(E) Heat gun
5 Electrical Connection
(C) Heat shrink tubing
36