It can be used for alarm and process control. Head Coil Cable <HLC-901PN> Sensor Rod <HTM-930N> Page 3 / 9 HITROL CO.,LTD. Doc. no. : HTM-930N_IM_Eng_Rev.0 Issued date : 2018. 01...
Dial SENSITIVITY (SENS.) Adjust sensitivity of sensor VIBRATION (VIB.) Adjust vibration of sensor ※ Caution: the wrong wiring can be affected to damage of product. Page 5 / 9 HITROL CO.,LTD. Doc. no. : HTM-930N_IM_Eng_Rev.0 Issued date : 2018. 01...
Make sure the any damage while handling and transportation is not allowed because it may cause of malfunction. Installation ■ Below recommendation should be considered when installation. Page 7 / 9 HITROL CO.,LTD. Doc. no. : HTM-930N_IM_Eng_Rev.0 Issued date : 2018. 01...
- Check and fasten the connecter to sensor Wrong wiring of Sensor Cable - Check the wiring with color of cables to Controller Bent of Sensor Contact Hitrol AS team. Page 8 / 9 HITROL CO.,LTD. Doc. no. : HTM-930N_IM_Eng_Rev.0...
Page 9
You can request A/S from our website or by contacting our headquarters. Headquarters, Factory, and Research Center (Contacts) Address: Hitrol, 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Republic of Korea (Palhakgol-gil 98) HITROL CO., LTD. 141, Palhakgol-road, Jori-eup, Paju-si, Gyeonggi-do, Korea...
Need help?
Do you have a question about the HLC-901N Series and is the answer not in the manual?
Questions and answers