AGT PSG BCR05 Installation Manual, Operating Manual, Maintenance Manual, Spare Part List page 9

Installation-, Operating-, Maintenance-Manual, Spare Part List
Assembly and Installation
Feed Lines
All operations mentioned below to be performed by qualified personnel only.
As a standard, medium connections of the sample gas cooler have been designed for a 6/4mm hose. The
sample gas cooler is equipped with 1-2 heat exchangers (PVDF, glass or SS316) and provides 1-4
gaspaths. The following feed lines must be connected:
 Sample gas pipelines to the gas inlet connections
 Analyzers to the gas outlet connections
 Condensate pumps/tanks to the condensate outlet connections
Marking
Gas inlet
Gas inlet HE1 (red)
Gas inlet HE2 (red)
The feed lines of the numerous possible heat-exchanger types (material PVDF/glass/SS316,
construction mono/dual, condensate connection top/bottom – see chapter "Technical Data")
may have different designs. Coolers without condensate pumps are equipped with heat-
exchangers with condensate outlet at bottom (pipe, 12mm outer diameter, without thread).
The picture above shows two SS316 mono-HEs with condensate connection at the bottom.
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Marking
Gas outlet
Gas outlet HE1 (blue)
Gas outlet HE2 (blue)
Condensate outlet HE1
Condensate outlet HE2
Translation - Manual BCR05 Rev. 06/2017
BCR05
Page 9