Table of Contents
Advertisement
Installation-, Operating-, Maintenance-Manual, Spare Part List
Protection Switches / Safety Devices
Reset High-Pressure and Low-Pressure Limiter
Pre-conditions: The sample gas cooler is correctly decommissioned (notice chapter „Decommissioning").
The sample gas cooler is in a non-explosive area.
DANGER: Explosive Area! The reset of protection switches and safety devices may be
processed exclusively in a non-explosive area considering the instructions of the manufacturer.
DANGER! Supply voltage! Be sure that no part of the sample gas cooler is powered.
Dismantle the right panel of the sample gas cooler. Reset the low-pressure and high-pressure limiter
(20.1). Remount accurately all dismantled components.
Combi-Instrument Pressure Limiter (20.1)
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Safety switch low-pressure
Safety switch high-pressure
Translation - Manual BCR05 Rev. 06/2017
BCR05
Page 20
Advertisement
Table of Contents
