Table of Contents
Advertisement
You can click "Continue" to back to previous setup page to continue on other setup procedures,
or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.6.2 Password
You can change the password required to log into the Router's web configuration utility. The
default user name and password are "admin". It is suggested to change the administrator's
default password as soon as you start to use the Router, and store it in a safe place. The
password can consist of 0 to 12 alphanumeric characters, and are case sensitive.
Parameters
Current Password
New Password
Confirmed Password
After you finish with all settings, please click "Apply" button.
If you want to reset all settings in this page, please click "Cancel" button.
Description
Enter the current password of the router.
Enter your new password.
Enter your new password again for verification purposes.
Note: If you forget your password, you'll have to reset the router to the
factory default (user name and password are both 'admin') by pushing
and holding the reset button on the back of the router for 10 seconds.
67
Advertisement
Table of Contents
